The HM Electronics Wireless 6000 Drive‑Thru Audio System User Manual provides setup, operation, and maintenance instructions for the system.
This manual covers the Wireless 6000 equipment, including the base station, communicators, speakers, and optional accessories. It explains how to install, configure, and operate the drive‑thru audio system in a quick‑service restaurant environment.
Detailed sections describe language selection, single‑ and dual‑lane operation, internal communication, speed‑team mode, wired backup, message repeater functions, equipment care, cleaning, and troubleshooting. Technical specifications and FCC compliance information are also provided. This manual is written in Chinese.
| Voltage input | 16VAC ±2.5V |
|---|---|
| Maximum AC current input | 2.5A |
| Audio distortion | 5% maximum |
| Outside speaker output | 3 W RMS into 8 Ω |
| Ceiling speaker power | 3 W RMS into 8 Ω |
| Dimensions | 7.75" H × 12.75" W × 3.8" D |
| Weight | 4 lb (1.81 kg) |
| TX/RX frequency | 2400 MHz – 2483.5 MHz |
| Battery type | 3.6 V Lithium‑ion |
| Battery life | 10 hours (typical) |
Press and hold the A1 button, the volume‑down button (W), and the power button (PWR) at the same time until the communicator restarts in the selected language.
A maximum of 15 communicators can be registered to a single base station.
Press the “PUSH FOR RECORD MODE” button once to prepare the base station to record a red message.
The VEHICLE PRESENT light turns on when a vehicle is present in the drive‑thru lane or when the system is in vehicle‑detect override mode.