Hirose DF1 Series 2.5mm pitch connectors for discrete wire: features, applications, ratings, materials, part numbers and protector options.
This Hirose catalog covers the DF1 Series, a 2.5mm pitch connector for discrete wire connection. It lists the connector features, the applications named by Hirose (FA equipment and measurement equipment), the product ratings and performance specifications, the materials used, and the ordering information for the connector, protector and contact part numbers.
Four connector types are described: the crimping socket, the ID socket, the pin header and the protector. The crimping type reaches a 10mm board mounting height, while the ID type protects the insulation displacement area with a protector, can be terminated with a simple ID tool, and allows intermediate connection for signal extraction during cabling. The document also gives cable sizes, jacket diameters, contact counts and the applicable UL1007 cable types.
| Current rating | 3 A (AWG 24), 2 A (AWG 26), 1 A (AWG 28); 3 A for the header only |
|---|---|
| Voltage rating | 250V AC |
| Contact pitch | 2.5mm |
| Board mounting height (crimping type) | 10mm |
| Insulation resistance | 1000M ohms Min at 500V DC |
| Withstanding voltage | 650V AC / 1 minute, no flashover or insulation breakdown |
| Contact resistance | 30m ohms Max at 100mA |
| Durability (mating/un-mating) | 30 cycles, tin plating |
| Number of contacts | 2 to 16 and 20 |
| Operating temperature range | -30 to +85 °C |
| Insulator material | Polyamide, light brown, UL94V-0 |
| Contact material and finish | Phosphor copper, tin plated |
The rating changes with cable size: 3 A for AWG 24, 2 A for AWG 26 and 1 A for AWG 28. For the header only, the rating is 3 A.
Hirose lists FA equipment and measurement equipment as the applications.
The series is offered with 2 to 16 and 20 contacts, depending on the part number.
Yes, for intermediate connection the connector allows signal extraction during cabling.