Hi-Force TWP-S Pneumatic Torque Wrench Operation Manual

This manual provides operation instructions for the Hi-Force TWP-S pneumatic torque wrench, covering safety, setup, tightening procedures, and maintenance.


Hi-Force TWP-S Pneumatic Torque Wrench Operation Manual - cover page
Brand
Hi-Force
Document type
User Manual
Language
Chinese
Pages
6
File format
PDF
File size
785 KB
Published
21 October, 2026
Updated
21 October, 2026
MD5 checksum
D2192BFA61CCC8527CB78B7C72902557

About this manual

The Hi-Force TWP-S is a hand-held pneumatic torque wrench designed for bolt connection tightening and loosening applications. It operates using compressed air connected to an air control kit (including regulator, lubricator, filter, and water separator) to ensure precise torque settings.

Operation involves setting the desired pressure on the gauge via the regulator, then pressing the trigger while holding a reaction arm against an adjacent bolt. The wrench automatically stops when the set torque is reached. Maintenance requires annual gear inspection and calibration by authorized service centers using original Hi-Force parts. This manual is written in Chinese.

What's inside

  • Product Inspection
  • Safety Precautions
  • Technical Parameters
  • Tool Installation
  • Torque Setting
  • Tightening Bolts
  • Loosening Bolts
  • Maintenance and Repair

Specifications

Air Consumption6.3 bar 20 l/s
Rated Power0.85 KW
Noise Level84 dB(A)
Vibration Level< 2.5 m/s2

Frequently asked questions

What oil type is required for the lubricator?

The manual specifies using HL HL 25 DIN 51524 - ISO VG32 oil.

How often should the wrench be calibrated?

The gear section requires inspection and possible recalibration once a year or after approximately 1000-2000 bolts.

Can the hose length be changed?

No, the hose length cannot be changed as it is installed at the factory.

Download PDF (785 KB)