This guide provides instructions for the efficient and safe installation of the Hengda Fuji FJHD freight elevator series, covering safety, site…
This manual is designed to ensure the efficient and fault-free installation of the Hengda Fuji FJHD freight elevator series, adhering to the principle of safety first. It applies to elevators with an integrated intelligent control system where the control cabinet is installed at the top floor or machine room. The guide covers various elevator types, including synchronous and asynchronous traction machines, with rated speeds up to 2.0 m/s and rated loads up to 10,000 kg.
The document details the entire installation process, starting from site requirements and tool preparation to specific component installations such as guide rails, landing doors, traction machines, governors, and car frames. It also includes instructions for wire routing, safety protection devices, and a comprehensive quality inspection checklist to ensure the elevator meets operational standards. This manual is written in Chinese.
| Rated Speed | ≤ 2.0 m/s |
|---|---|
| Rated Load | ≤ 10000 kg |
| Maximum Leveling Error | ±5mm |
| Brake Maximum Gap | 0.1mm |
| Guide Rail and Guide Shoe Gap | 2~3mm |
Construction personnel must disconnect all power sources, verify they cannot be re-energized, confirm installation is done without power, check grounding, and protect moving parts.
The maximum gap for the brake should be 0.1mm.
The maximum leveling error in both directions is ±5mm.