This user manual for the HCH HCH-2000D ultrasonic thickness gauge describes operation, calibration, measurement methods, and technical specifications.
The HCH HCH-2000D is a digital ultrasonic thickness gauge for measuring the thickness of metals and non-metals. It can measure steel, stainless steel, aluminum, copper, chromium alloy, plastic, rubber, ceramic, and glass. Key specifications include a measurement range of 0.65 to 350 mm on 45# steel, sound velocity range of 1000 to 9990 m/s, display resolution of 0.01 mm, storage for 600 measurement points, and an RS232 interface for a micro printer or PC.
This manual describes the instrument overview, technical specifications, controls and display, operating procedures, accessories, and measurement methods with precautions. It explains powering on, measuring, calibrating against a standard test block, and configuring storage, sound velocity, probe, printing, communication, and unit settings. This manual is written in Chinese.
| Measurement range | 0.65–350 mm (45# steel) |
|---|---|
| Sound velocity range | 1000–9990 m/s |
| Measurement error | 1% × thickness value ± 0.05 mm |
| Storage capacity | 600 measurement points |
| Dimensions | 124 × 51 × 27 mm³ |
| Weight | about 160 g (with battery) |
| Probe frequency | 2–10 MHz |
| Data interface | RS232 |
Measure the standard test block; if the reading is not 4.00 mm, hold the CAL key for about 2 seconds until it shows 4.00 mm.
It measures metals such as steel, stainless steel, aluminum, copper, and chromium alloy, and non-metals such as plastic, rubber, ceramic, and glass.
The instrument can store 600 measurement points.
It turns off automatically after five minutes of standby.