Harder & Steenbeck Evolution Series Airbrush Instructions for Use

Multilingual instructions for Harder & Steenbeck Evolution series airbrushes, covering safe use, commissioning, air pressure and spare parts.


Harder & Steenbeck Evolution Series Airbrush Instructions for Use - cover page
Brand
HARDER & STEENBECK
Category
Other
Document type
User Manual
Language
German
Pages
36
File format
PDF
File size
3.5 MB
Published
16 November, 2026
Updated
16 November, 2026
MD5 checksum
53DFAE345AA885A80516C978DC765353

About this manual

The Harder & Steenbeck Evolution, Evolution X, Evolution Silverline, Evolution Silverline fPc, Evolution Silverline M, Evolution CRplus and Evolution ALplus airbrushes are paint sprayers for airbrush paints or lacquers. They may only be connected to a compressor or another suitable compressed air source. The manual gives safety instructions, including needle handling, ventilation, respirator use with solvent-based paints, and disconnecting the air supply before dismantling.

The document also shows control elements and spare parts, describes commissioning with a hose and compressed air source, and lists recommended and maximum air pressure. The Evolution Silverline series is specially designed for solvent-containing products. This manual is written in German.

What's inside

  • Correct use
  • Safety instructions
  • Control elements and spare parts
  • Commissioning
  • Recommended air pressure
  • Maximum air pressure
  • Frequently-used spare parts / conversion parts

Specifications

Recommended air pressure1.5–3 bar (14.5–43.5 psi), depending on paint and background
Maximum air pressure4 bar (58 psi)
Suitable paint consistencyMilky consistency
Air connectionScrew connector or quick-action coupling, 2.7 mm nominal diameter
Standard flow cup2 ml, except Evolution X / Silverline M

Frequently asked questions

What is the recommended air pressure for the airbrush?

Recommended air pressure is 1.5–3 bar (14.5–43.5 psi), depending on the paint and background.

What paints or lacquers can be used?

All commercially available airbrush paints or lacquers with a milky consistency are suitable; thin them if necessary.

How is the airbrush connected to an air supply?

Connect it to a hose and a suitable compressed air source with a screw connector or a quick-action coupling of 2.7 mm nominal diameter.

What should be done before dismantling the airbrush?

Disconnect it from the air compressor before dismantling.

Download PDF (3.5 MB)