The Hangzhou Kingsun SSRPT Silicon Semiconductor Tester User Manual provides setup, operation, and maintenance instructions.
This manual introduces the Hangzhou Kingsun SSRPT silicon semiconductor tester, covering quick start steps such as installing the 9 V battery, connecting the four‑probe cable, powering on the device, and setting sample thickness. It also explains how to adjust parameters, use the keyboard functions, and interpret the display icons.
Detailed sections describe battery specifications, parameter ranges (thickness, calibration coefficient, alarm threshold), keyboard operation modes, soft‑shutdown procedures, and warranty information. The document ends with copyright and contact details for Hangzhou Kingsun. This manual is written in Chinese.
| Test range | 0.001 ~ 200 |
|---|---|
| Battery type | 9 V DC (alkaline recommended) |
| Battery life compared to SRPT‑VI | More than 10× longer |
| Thickness setting range | 0.01 ~ 4.00 mm |
| Resistance unit | Ω·cm |
| Calibration coefficient range | 4000 ~ 5000 |
| Alarm threshold range | 0.0 ~ 1.0 Ω·cm |
Install a 9 V battery, then press the power button; the LCD screen lights up and shows the startup screen.
Use the up/down keys to adjust the thickness value between 0.01 mm and 4.00 mm; the thickness icon will flash while setting.
Long‑press the power button for about 2 seconds until the LCD turns off; the device remains in a low‑power state.
The main unit is covered for one year from the purchase date for free repair under normal use.