GW Laser Tech YLLS Series Continuous Fiber Laser User Manual

Chinese user manual for the GW Laser Tech YLLS series continuous fiber laser, covering laser safety, specifications, installation, operation and…


GW Laser Tech YLLS Series Continuous Fiber Laser User Manual - cover page
Brand
光惠激光 (GW Laser Tech)
Category
Other
Document type
User Manual
Language
Chinese
Pages
46
File format
PDF
File size
2.3 MB
Published
16 November, 2026
Updated
16 November, 2026
MD5 checksum
5BFF3DC3A89A4C7D632320C048A902F2

About this manual

This is the Chinese user manual (Document V1.1, 20231031) for the GW Laser Tech YLLS series continuous fiber laser, issued for models YLLS-1000-W, YLLS-D40-1200-W, YLLS-1500-W and YLLS-2000-W. The manual states that the YLLS laser is a Class 4 laser product that emits invisible laser radiation of up to 2000 W at wavelengths between 900 nm and 1100 nm, and it opens with laser safety regulations, safety performance items, safety labels and the required warnings and cautions.

The rest of the manual describes the front and rear panels, optical, mechanical, environmental and power specifications, the control and monitoring I/O interface, the RS-232 interface and product dimensions including the QBH-type optical output connector. It then covers preparation (unpacking, installation, power connection, water cooling), operation including the internal power control CW mode, the external-control pulse mode and the red guide laser, the human-machine interface and its hotspot connection, maintenance and troubleshooting such as cleaning the QBH quartz block, warranty and service, and tables of system status codes and fault codes. This manual is written in Chinese.

What's inside

  • Laser Safety
  • Safety Regulations and Safety Performance
  • Safety Labels
  • Front Panel and Rear Panel Description
  • Optical Performance and Optical Output Parameters
  • Mechanical and Environmental Parameters
  • Power Requirements
  • Control and Monitoring I/O Interface / RS-232 Interface
  • Product Dimensions and QBH Optical Output Connector
  • Preparation: Unpacking, Installation, Power and Water Cooling Connection

Specifications

Laser classHigh-power Class 4 laser product
Output powerUp to 2000 W
Wavelength range900 nm to 1100 nm
Cooling methodWater cooling
Optical output connectorQBH type
Applicable standardsIEC/EN60825-1, 21 CFR 1040.10 and 1040.11

Frequently asked questions

What laser class is the YLLS series fiber laser?

It is a high-power Class 4 laser product that can output up to 2000 W of invisible infrared light.

What is the output wavelength range of the laser?

The radiation wavelength is between 900 nm and 1100 nm.

How is the laser cooled?

The laser uses water cooling, and the water flow rate must meet the requirement to cool the unit effectively.

What type of optical output connector does it use?

The optical output connector is the QBH type.

Download PDF (2.3 MB)