Use and maintenance manual for GRIPHOIST manual hoists models TU-17, TU-28, TU-32, T-508, T-516 and T-532.
GRIPHOIST manual hoists pull wire rope in a straight line using two pairs of self-energizing grip jaws. This booklet covers models TU-17, TU-28, TU-32, T-508, T-516 and T-532, including technical specifications, operating instructions, anchoring methods, wire rope insertion, overload protection with shear pins, capacity increase with sheave blocks, and wire rope requirements.
The manual states that only GRIPHOIST wire rope should be used and that capacity can be multiplied with sheave blocks. It also describes safety precautions such as not exceeding rated capacity and inspecting safety latches.
| Material lifting capacity | 2,000 to 8,000 lbs depending on model |
|---|---|
| Manriding capacity | 1,500 to 6,000 lbs on selected models |
| Approximate speed | 5 to 9 fpm depending on model |
| Hoist weight | 14.25 to 59.5 lbs depending on model |
| Operating handle weight | 2.2 to 5.3 lbs depending on model |
| Overall dimensions | From 16-1/2 in. to 27x13 in. depending on model |
| Operating handle length | 22/28 to 47-1/2 in. depending on model |
| Standard wire rope length | 30 or 60 ft depending on model |
| Wire rope diameter | 5/16, 7/16 or 5/8 in. depending on model |
| Wire rope breaking strength | 10,000 to 40,000 lbs depending on model |
It uses two pairs of self-energizing grip jaws that alternately grip and pull or retain the wire rope.
Only GRIPHOIST wire rope should be used; the manufacturer declines responsibility for machines used with other wire rope.
Using sheave blocks can multiply the nominal capacity two, three, or four times.
Shear pins in the power stroke lever shear under overload, which can be 50 to 100 percent depending on working conditions.