Installation guide for the Gravotonics yoga swing covering ceiling, concrete, beam, doorway and outdoor hanging methods.
This guide explains how to install a Gravotonics yoga swing using through-ceiling, concrete-ceiling, exposed-beam, doorway and outdoor methods. It lists tools and materials such as O-ring bolts, brackets, daisy chains, drills and drill bits.
It also covers ceiling height, adjustable strap positions, safety checks, minimum clear space and beam strength. The guide includes a FAQ about hanging, securing, doorway use, hook spacing, height and tree installation.
| Hook spacing | 60 to 80 cm (24 to 32 inches) apart |
|---|---|
| Starting swing height | about 7 ft off the ground |
| Minimum clear space | at least 1 meter in all directions |
| Minimum beam size | at least 4x4 or 2x6 |
| Saddle height | just above butt crease or 15 cm below hip crest |
| Inversion head clearance | at least 10 cm between head and floor |
The O rings should be inserted into the ceiling beam 60 to 80 cm apart, about shoulder width.
For most purposes the sling should be at belt-line height, and it can be adjusted with daisy chains.
Hang the two included daisy chain straps over a sturdy branch about shoulder width apart, then hook the swing fittings through the appropriate loops.
Tie a sturdy knot in one end of both daisy chains, hang them over the door shoulder width apart, close the door, then hook the swing on at the desired height; a doorway mount or pull-up bar is best.