Gilson MINIPULS® 3 Peristaltic Pump User's Guide

User's guide for the Gilson MINIPULS 3 peristaltic pump, covering safety, setup, operation, maintenance, remote control, and specifications.


Gilson MINIPULS® 3 Peristaltic Pump User's Guide - cover page
Brand
Gilson
Category
Other
Document type
User Manual
Language
English
Pages
60
File format
PDF
File size
2.5 MB
Published
06 November, 2026
Updated
06 November, 2026
MD5 checksum
15CD7DC5D38C5859E7BF51F40197A740

About this manual

The MINIPULS 3 peristaltic pump is designed for process laboratory liquid handling. It combines microprocessor speed control with a high-torque stepper motor, and its chemical-resistant pump heads have five or ten stainless steel rollers to produce smooth, low-pulse flow and reproducible flow rates at higher pressures.

The user's guide explains setup and operation, including electrical connection, pump head installation or change, tubing selection and fitting, safety cover installation, and flow rate adjustment. It also covers keypad functions, initialization, autostart, unit ID changes, routine maintenance, troubleshooting, remote control, GSIOC control, and consumables and spare parts.

What's inside

  • Safety
  • Technical Specifications
  • Setup
  • Tubing Selection and Fitting
  • Flow Rate Selection and Adjustment
  • Keypad Functions
  • Routine Maintenance
  • Troubleshooting
  • Remote Control
  • Consumables and Spare Parts

Specifications

Operating Temperature4–40°C
Head Speed0.01 to 48 rpm
Maximum Flow Rate (MP model)40 mL/min (1.8 L/h, 4 mm tubing)
Maximum Flow Rate (HF model)250 mL/min (15 L/h, 8 mm tubing)
Maximum Back Pressure0.5 MPa (72.5 psi) for MP models; 0.3 MPa (43.5 psi) for HF models
Peristaltic Tubing Diameter0.25 to 4 mm ID for MP models; 2 to 8 mm ID for HF models
Power RequirementsInput 100–240V AC, 50 to 60 Hz; output 24V DC, 1.7A, 41W
Dimensions without Pump Heads15.0 x 17.5 x 18.5 cm (5.9 x 6.9 x 7.3 in.)
Weight2.5 kg (5.5 lbs.)
HumidityUp to 80%

Frequently asked questions

What is the MINIPULS 3 pump intended to be used for?

It is intended to be used in the laboratory, or similar indoor environment, by trained technical personnel. The instrument must not be directly connected to humans for any purpose.

Can the pump be operated without the safety cover?

No. The guide states that the pump must not be operated without the safety cover installed.

What is the operating temperature range of the MINIPULS 3?

The operating temperature range is 4–40°C.

What peristaltic tubing diameters are supported?

MP models support 0.25 to 4 mm ID tubing, and HF models support 2 to 8 mm ID tubing.

Download PDF (2.5 MB)

More Gilson Manuals


View all Gilson manuals →