Genvolt XRT01-60KV-P-18W-X high voltage power supply user manual covering installation, operation, maintenance, and communication protocols for 60kV 18W…
The Genvolt XRT01-60KV-P-18W-X is a high-voltage DC power supply designed for industrial X-ray non-destructive testing, delivering up to 60 kV positive polarity at 300 μA with low ripple (<0.1% RMS). It operates from a 24 V DC input and includes integrated filament, cathode, and grid bias supplies, all controllable via RS232, USB, or Ethernet.
The manual provides safety warnings, installation steps, operating procedures, maintenance schedules, replacement parts list, factory service information, and the MODBUS communication protocol for remote monitoring and control. The unit measures 174 × 205 × 167 mm, weighs about 8 kg, and operates in 0–50 °C environments. This manual is written in Chinese.
| Input Voltage | 23-25 V DC |
|---|---|
| Output Voltage | 0-60 kV positive polarity |
| Output Current | 0-300 μA |
| Output Voltage Stability | <0.1% after thermal stabilization |
| Output Voltage Ripple | <0.1% RMS |
| Filament Voltage | 0-8 V DC |
| Filament Current | 0-1.5 A DC |
| Cathode Voltage | 0-2000 V DC negative polarity |
| Cathode Voltage Ripple | <0.1% RMS |
| Grid Bias Voltage | 0-100 V DC negative polarity |
| Grid Bias Ripple | <0.1% RMS |
| Control Interfaces | RS232, USB, RJ45 (default RS232) |
| Input Connector | Standard NCS-253-R three-pin male socket |
| Humidity | <90% non-condensing |
| Dimensions | 174 mm W × 205 mm H × 167 mm D |
| Weight | Approx. 8 kg |
The input voltage range is 23-25 V DC.
It supports RS232, USB, and RJ45 Ethernet for remote monitoring (default RS232).
Dimensions are 174 mm wide × 205 mm high × 167 mm deep, weight approximately 8 kg.
Ensure proper grounding, do not touch unless powered off and capacitors discharged, wait 5 minutes after power off, wear insulated shoes, avoid humid environments.