User manual for the GENICOM Model 930/935 dot matrix printer covering safety, setup, paper loading, specifications, and commands.
The GENICOM Model 930/935 User's Manual (GEK-89363) explains safe setup and operation of the printer. It covers safety precautions, unpacking, removing shipping restraints, installing or replacing the ribbon cartridge, connecting power and computer, and loading continuous forms.
The manual also lists printer features and specifications, including print speeds, emulations, interfaces, paper specifications, reliability, and command tables for TI855 DP and TI855 WP emulations.
| Print Method | Impact dot matrix |
|---|---|
| Printhead | 9 pins, 0.34 mm diameter, thermal protection |
| Super Speed Draft print speed | 435 cps |
| High Speed Draft print speed | 390 cps |
| Utility print speed | 300 cps |
| Near Letter Quality print speed | 75 cps |
| Emulations | Epson FX (ESC/P), IBM Proprinter III(PPSII), TI 855 DP and TI 855 WP |
| Standard interface | IEEE 1284 compliant parallel |
| Optional interface | RS-232C serial |
| Graphics resolution | 240 (H) x 216 (V) dpi |
| Receive buffer size | 28K |
| MTBF | 10,000 hours at 25% duty cycle and 35% page density |
It reaches 435 cps in Super Speed Draft (SSD) mode.
It supports Epson FX (ESC/P), IBM Proprinter III(PPSII), TI 855 DP, and TI 855 WP.
An IEEE 1284-compatible parallel cable is needed; FCC regulations require a shielded cable no longer than 6 ft. (1.8 m).
The MTBF is 10,000 hours at 25% duty cycle and 35% page density.