GAN Electronic 750W/1000W DE US Horticultural Fixture User Manual

User manual for the GAN Electronic 750W/1000W DE US horticultural fixture, covering installation, safety, specifications, and status LED troubleshooting.


GAN Electronic 750W/1000W DE US Horticultural Fixture User Manual - cover page
Brand
GAN Electronic
Category
lighting
Document type
User Manual
Language
English
Pages
8
File format
PDF
File size
3.4 MB
Published
16 November, 2026
Updated
16 November, 2026
MD5 checksum
2EABD5B6AB7E883A4DA3F559A9C2A736

About this manual

The GAN Electronic 750W/1000W DE US is an electronic horticultural fixture that drives one double-ended high-frequency (electronic) high-pressure sodium lamp. The 750W version uses an HPS 750W 400V lamp, and the 1000W version uses an HPS 1000W 400V lamp. It is intended for use in greenhouses or climate rooms.

The manual covers installation by certified service personnel, mains connection with a Wieland RST20i3 connector, safety warnings, product specifications, and troubleshooting through the status LED. It lists Gavita International bv as the manufacturer and includes compatible lamps and reflectors.

What's inside

  • Introduction
  • Product description
  • Product information and specifications
  • Safety recommendations and warnings
  • Contents
  • Controls, connections and indications
  • Installation
  • Precautions when using the fixture
  • Troubleshooting using the status LED

Specifications

Input voltage (750W / 1000W models)400 V / 277 V, 347 V, 400 V
Input wattage (750W / 1000W models)795 W / 1045 W, 1040 W, 1032 W
Input current at 100% (750W / 1000W models)2.03 A / 3.85 A, 3.06 A, 2.6 A
Power factor> 0.98
Product weight3.7 kg / 8.2 lbs; 3.8 kg / 8.6 lbs; 3.6 kg / 7.9 lbs
Dimensions (LxWxH)22.2” x 9.7” x 7.8” (56.5 x 24.5 x 19.5 cm), height excluding mounting hooks
Temperature case75 °C / 167 °F
Temperature ambient0 to 35 °C / 32 to 95 °F
Relative humidity70%, not condensating
Total Harmonic Distortion< 10%
Frequency50 - 60 Hz
CertificationCSA 252952
Insulation classClass 1, requires an earth connection
Power inletWieland RST20i3 IP20 connector
Ignition voltage4 kV
Earth leakage current≤ 1 mA

Frequently asked questions

What type of lamp does the fixture drive?

It drives one double-ended high-frequency (electronic) high-pressure sodium lamp. The 750W version uses an HPS 750W 400V lamp, and the 1000W version uses an HPS 1000W 400V lamp.

Who may mount and install the fixture?

Mounting and installation may only be performed by certified service personnel in accordance with local laws and regulations.

How long should I wait before touching the lamp or reflector after use?

Wait at least 30 minutes for the fixture to cool down; the lamp and reflector can reach temperatures above 85 °C / 185 °F.

What is the status LED for?

On 400V models, the status LED shows the condition of the lamp and electronic ballast to help troubleshoot errors.

Download PDF (3.4 MB)