Portuguese user manual for the Full Gauge MT-516CVT temperature controller, covering setpoint adjustment, timer, voltage monitoring, wiring and specifications.
This Portuguese user manual covers the Full Gauge MT-516CVT temperature controller. According to the text, the MT-516CVT controls and indicates temperature and can be configured for refrigeration or heating. It also has a cyclic timer and a voltage monitor.
The document explains setpoint adjustment, signal indications, parameter changes, timer operation, voltage monitoring, unit selection and the wiring diagram. It includes technical specifications and notes on extending the sensor cable and installing suppressors. This manual is written in Portuguese.
| Power supply | 120/240 V ac ±10% (50/60 Hz) |
|---|---|
| Control temperature range | -50 to 105 °C (-58 to 221 °F) |
| Maximum current per output | 5(3) A / 250 V ac 1/8 HP |
| Dimensions | Diameter 60 mm; depth 40 mm |
| Operating temperature | 0 to 60 °C / 32 to 140 °F |
| Operating humidity | 10 to 90% RH (non-condensing) |
| Sensor cable length | Up to 200 m using 2 x 0.14 mm (20 AWG) microphone cable |
The control temperature range is -50 to 105 °C, corresponding to -58 to 221 °F, with decimal resolution between -10 and 100 °C.
Use the keys to modify the setpoint value and press again to save it.
The thermostat output and the cyclic timer output are switched off after the time set in F16.
Set functions F13 and F14 to the same value.