Operator's manual for the FMH Conveyors BestFlex BFP 1.5 and BFP 1.9 conveyor system, covering specifications, installation, maintenance and troubleshooting.
FMH Conveyors operator’s manual for the BestFlex BFP 1.5 and BFP 1.9 conveyor system. It gives standard product specifications, application guidelines, installation and assembly steps, maintenance procedures, troubleshooting, wiring and schematic information, parts lists and drawings, and recommended spare parts.
The manual also covers product options including the Interface Kit, Package Stop Kit, Indexing Kit, Side Rail Kit, PowerTrax and Split Kit. Safety and service instructions, warranty details and daily maintenance checks are included.
| Conveyor bed width | 18, 24, 30 in (457, 610, 762 mm) |
|---|---|
| Load capacity per linear foot | 100 lb (45.5 kg) |
| Roller diameter | BFP 1.5: 1.5 in (38.1 mm); BFP 1.9: 1.9 in (48.26 mm) |
| Product travel speed | 0-120 ft/min (36.58 m/min) |
| Adjustable conveyor height | BFP 1.5: 31 ½ to 44 ½ in (800 to 1,130 mm); BFP 1.9: 28 ½ to 37 ½ in (724 to 946 mm) |
| Belt material | Polyurethane |
| Voltage | 120VAC |
| Current | .85 Amps per motor |
| Drive motor | 1/8 HP rated |
| Noise level at conveyor bed level | Approx. 70 dB |
The conveyor is rated at 100 pounds per linear foot on a level surface.
A depressed Emergency Stop push-button prevents the conveyor from running, so release all E-stop buttons before operation.
Adjust the speed with the potentiometer on the DC Variable Speed Drive located near the middle of the conveyor.
The brush should be replaced if it measures 0.125 inches or less.