User manual for the Flysky FS-R4D-ESC 2-in-1 receiver, covering binding, car light control modes, and protection features.
The Flysky FS-R4D-ESC is a 2-in-1 receiver compatible with the ANT protocol, designed for 1/10 scale crawlers, on-road cars, and trucks. It combines an Electronic Speed Control (ESC) and a 6-channel LED light control board, featuring an external single antenna and automatic binding capability. The device supports 4 channels and 6 light interfaces, outputting PWM signals and car light control signals with two-way transmission. This manual is written in Chinese.
| Number of Channels | 4 |
|---|---|
| Numbers of Light Interfaces | 6 |
| Wireless Frequency | 2.4GHz ISM |
| Wireless Protocol | ANT |
| Input Power | LiPo (2~3S)/NiMH(5~9Cell) |
| BEC Output | 6V/3A |
| Continuous/Peak Current | 40A/200A |
| Motor Type | Brushed Motor |
| Applicable Motors | 550, 540, 390, 370 or 280 Brushed Motor |
| Resolution | 4096 |
| Temperature Range | -10℃ ~ +60℃ |
| Waterproof Rating | IPX7 |
| Dimensions | 44mm*30mm*16.7mm |
| Weight | 43g |
When the voltage is detected to be low, CH2 has no output and all the car lights flash slowly.
It supports 550, 540, 390, 370 or 280 Brushed Motors.
The receiver features 6 sets of lights: Left turn signal, Right turn signal, Headlight, Tail light, Ambient light, and Roof light.