The Flying Voice B1 WiFi cordless telephone base station user manual provides setup, configuration, and troubleshooting instructions.
The B1 is a dual‑band WiFi cordless telephone base station designed for indoor coverage in hotels, offices, and other small‑to‑medium environments. It supports AP and repeater modes, offers web‑based management, and integrates with the Flying Voice FACS platform for centralized control.
The manual covers hardware details, default network settings, Wi‑Fi security options, and step‑by‑step procedures for logging into the management page, configuring WAN/LAN, VPN, VLAN, QoS, and wireless parameters. It also includes diagnostic tools, firmware upgrade instructions, and a FAQ section for common issues. This manual is written in Chinese.
| Default WAN IP address | 192.168.1.1 |
|---|---|
| Maximum client connections | 16 |
| 2.4 GHz Wi‑Fi mode | 802.11b/g/n |
| 5 GHz Wi‑Fi mode | 802.11ac |
| Power LED status | Green solid when powered |
| Reset button operation | Hold RST 5 s to restore factory defaults |
| Supported encryption | 64/128‑bit WEP |
| CE certification | Complies with EU Directive 2014/35/EU |
| FCC certification | Complies with FCC Part 15 B‑class limits |
检查电源适配器是否正确连接并与B1接触良好。
确认局域网内没有其他设备使用B1的默认IP 192.168.1.1，或为B1分配一个未被占用的静态IP。
检查B1的IP地址是否已改变，使用路由器查看当前IP并在浏览器地址栏输入该IP；必要时恢复出厂设置后再尝试登录。
按住RST按钮约5秒钟，设备将恢复出厂设置。