FireVu Multi-Detector combines video smoke, flame and thermopile heat detection in one IP66 unit with 16 zones, relays and NetVu remote support.
The FireVu Multi-Detector is a stand-alone unit that combines smoke, flame and heat detection for indoor and outdoor use. It uses dual layer smoke detection analytics for accumulating ambient smoke and smoke plumes, plus colour and intensity-based flame detection analysis. The Multi-Detector adds a thermopile array for additional flame verification and rising-temperature detection, and it offers 16 independent zones for each of heat, smoke and flame detection, dynamic zone masking, two sets of detection parameters for different periods, and two programmable temperature thresholds to tell warnings from alarms. Alarms are reported over on-board relays and/or monitored loop operation, alarm inputs are provided for systems integration, and internal video and data recording supports post-event forensic analysis locally and remotely. NetVu Cloud-based support allows remote configuration, health-checking, maintenance and support.
The technical specification covers a 1/4" CMOS progressive scan image sensor with WDR >80Db, JPEG and MPEG-4 compression, fixed lens options (FVMD/500/2M4, FVD/500/3M5, FVD/500/6M0, FVMD/500/6M0, FVD/500/12M0) with range references from 10m to 70m, a thermopile field of view from 39° to 90° and a temperature range of -20°C to 1000°C, four non-polarised solid-state relay outputs, 12V DC, 24V DC and/or PoE power at 4.5 Watts, IP66 rating, -10°C to 50°C operating temperature, dimensions of 369mm x 270mm x 100mm and 3.0kg weight. The document also lists network protocols, accessories, patents for the flame detection algorithm in the UK, Europe and the USA, and a 1 year warranty plus an additional year with registration.
| Image Sensor | 1/4" CMOS progressive scan |
|---|---|
| Wide Dynamic Range | >80Db |
| Signal to Noise Ratio | >50dB |
| Minimum Illumination | 20lux or IR flood lights providing even illumination |
| Compression | JPEG and MPEG-4 |
| Detection Zones | 16 independent zones for each of heat, smoke and flame |
| Thermopile Temperature Range | -20°C to 1000°C (-4°F to 1832°F) |
| Relay Outputs | 4 x non-polarised solid-state relay outputs; outputs 1&2 600mA at 60V DC, outputs 3&4 2.2A @60V DC |
| Storage | Internal SD card recording, max 64GB |
| Power | 12V DC, 24V DC and/or PoE, 4.5 Watts |
| Ingress Protection Rating | IP66 |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Operating Humidity | 20% to 80% relative humidity, non-condensing |
| Dimensions | 369mm x 270mm x 100mm (14½" x 10⅝" x 4") |
| Weight | 3.0kg (6lb, 10oz.) |
| Warranty | 1 year, plus additional 1 year (registration required) |
It provides smoke, flame and heat detection for indoor and outdoor use in a single stand-alone unit, with the Multi-Detector adding a thermopile array for flame verification.
It can run on 12V DC, 24V DC and/or PoE and draws 4.5 Watts.
It has 16 independent zones for each of heat, smoke and flame detection, plus dynamic zone masking.
Yes, flame detection and the thermopile are fully functional in complete darkness.