The FINO PREMIUM 22/F 22 dental duplicating silicone user manual provides preparation, dosing, mixing, application, storage, and safety instructions.
This manual describes the intended purpose, indications, and contraindications for FINO PREMIUM 22/F 22 duplicating silicone used in dental laboratories. It also lists safety precautions, storage requirements, and warranty information.
Key sections cover component preparation, a 1 : 1 mixing ratio, manual and automatic mixing methods, model duplicating steps, and detailed physical data such as viscosity, density, and hardness. The document ends with disposal guidelines and symbol explanations. This manual is written in German.
| Mixing ratio (A:B) | 1 : 1 |
|---|---|
| End hardness | 22 Shore A |
| Viscosity | 3000 mPa·s |
| Density | 1075 g/cm³ |
| Tensile strength | 4.0 N/mm² |
| Tensile elongation | 500 % |
| Linear dimensional change | 0.2 % |
| Manual mixing time | ≈ 1 min |
| Storage temperature limit | ≤ 25 °C |
Combine components A and B in a 1 : 1 ratio, stir with a spatula until a homogeneous colour is achieved.
The silicone may only be used by qualified professional personnel.
Dispose of the contents and container according to local, regional, national, and international regulations.