Instruction manual for the Fann Permeability Plugging Apparatus (models 206845 and 206846), covering safety, installation, filtration testing, maintenance…
The Fann Permeability Plugging Apparatus (PPA) is a high-pressure, high-temperature instrument designed to simulate downhole static filtration. It operates at temperatures and pressures representing well conditions, with a ceramic disc filter medium positioned above the sample fluid.
This manual covers safety, installation, filtration test procedure, test analysis, maintenance, accessories, parts list, warranty, and returns. It applies to instrument numbers 206845 (115V) and 206846 (230V).
| Pressure Range | 0 to 5000 psi (34,473 kPa) |
|---|---|
| Temperature Range | 50°F to 500°F (10°C to 260°C) |
| Power Supply | 115V / 230V, 50/60 Hz, 800 watts |
| Dimensions | 8 x 25 x 12 inches (20 x 63.5 x 30.5 cm) |
| Weight | 66 lb (30 kg) |
| Maximum Test Pressure | 5000 psi (34,474 kPa) |
| Maximum Operating Temperature | 500°F (260°C) |
| Maximum Backpressure Receiver Pressure | 750 psi (5171 kPa) |
| Cell, End Cap, and Retainer Ring Material | Type 17-4 stainless steel |
| Floating Piston Material | Type 303 stainless steel |
The maximum operating temperature is 500°F (260°C).
Either nitrogen or carbon dioxide must be used; compressed air and oxygen are not allowed.
Nitrogen should be used for the backpressure.
The maximum pressure for the backpressure receiver is 750 psi (5171 kPa).