Fanhai Sanjiang JTW-ZD-920 Point-Type Heat Fire Detector User Manual

User manual for the Fanhai Sanjiang JTW-ZD-920 point-type heat fire detector, covering specs, wiring, installation, debugging, and troubleshooting.


Fanhai Sanjiang JTW-ZD-920 Point-Type Heat Fire Detector User Manual - cover page
Brand
JTW-ZD-920
Category
Monitoring Equipment
Document type
User Manual
Language
Chinese
Pages
2
File format
PDF
File size
368 KB
Published
11 February, 2012
Updated
13 November, 2026
MD5 checksum
10C7DB150DCD8761BB093570A7C21573

About this manual

Fanhai Sanjiang JTW-ZD-920 is a point-type heat fire detector for use with 9000 series controllers. It uses a non-polarized two-wire bus, supports field electronic addressing, and reports temperature data to the controller.

The manual covers product features, technical parameters, dimensions, wiring, installation and debugging, precautions, maintenance, and troubleshooting. It also lists compatible controllers, coding range, environmental limits, and warranty terms. This manual is written in Chinese.

What's inside

  • Product overview
  • Product features
  • Technical parameters
  • Appearance and dimensions
  • Use and engineering application
  • Installation and debugging
  • Precautions
  • Maintenance and care
  • Troubleshooting

Specifications

Execution standardGB4716-2005
Working voltage24 V (pulse modulation)
Working currentStandby <300 uA; alarm <1.5 mA
Working indicationStandby: red LED flashes; alarm: red LED steady
WeightAbout 47 g
Product categoryA2
DimensionsDiameter 100 mm, height 56 mm (with base)
WiringNon-polarized two-wire (L1, L2)
Operating environmentIndoor, -10 to +50 C, relative humidity <=95% (40 +/-2 C, no condensation)
Address codingField coding via encoder; addresses 1-324
Installation height<=8 m
Compatible controllers9000 series controllers (e.g. JB-QTL-9000 or JB-QBL-MN/300)

Frequently asked questions

Which controllers can the JTW-ZD-920 connect to?

It is designed for 9000 series controllers, such as JB-QTL-9000 or JB-QBL-MN/300.

What address range can be programmed?

Addresses from 1 to 324 can be selected with an encoder.

What wiring method does the detector use?

It uses a non-polarized two-wire bus on L1 and L2.

What is the installation height limit?

Installation height must not exceed 8 m.

Download PDF (368 KB)