French owner's manual and installation instructions for the Erie Connect app used to configure, control and monitor an Erie water softener over Wi-Fi.
This French-language owner's manual covers the Erie Connect™ application and the electronic control panel of the water softener it is paired with. It opens with operating conditions and network requirements, then explains the Wi-Fi related limits of the connection and how to report an application bug to Erie's technical support ([email protected]).
The programming section walks through the basic settings on the control panel — language, time, hardness unit, incoming water hardness, buzzer, PIN code, Wi-Fi mode and IP address — and an advanced menu for resetting the Wi-Fi/database connection and checking firmware updates. The last part covers installing the app from the Apple App Store or Google Play Store, registering a new device with the serial number and PIN, notification settings including the low salt alarm and the 24-month maintenance reminder, and editable device settings. This manual is written in French.
| Supported Wi-Fi networks | 2.4 GHz only |
|---|---|
| Programming-mode timeout | 5 minutes without a button press, then return to service mode without saving |
| Maintenance counter | Preprogrammed every 24 months |
| Advanced menu language | English only |
| App download sources | Apple App Store and Google Play Store |
| Serial number location | On the back of the salt tank lid |
| Signal quality scale | 0 to -40 excellent, -40 to -70 good, -70 to -80 weak, below -80 unusable |
Only 2.4 GHz networks are supported. Also make sure the Wi-Fi signal at the installation site is strong enough, adding an extra access point if needed.
The serial number is on the back of the salt tank lid, and the PIN is shown on the control panel under basic settings step 6.
From the Apple App Store or the Google Play Store; then open the app and register the device from the device list with the + button.
Note the device serial number and unique PIN, describe the problem with screenshots, give your smartphone specifications and the app version, and email everything to [email protected].