This manual covers setup, configuration, and specifications for the ENTTEC DIN-ODE Mk2, a DMX over Ethernet node supporting Art-Net, sACN, and ESP protocols.
The DIN-ODE Mk2 is a DMX over Ethernet node designed to convert between Ethernet protocols (Art-Net, sACN, ESP) and DMX512. It features a web-based interface for configuration, allowing users to set network parameters, port direction (Input/Output), and protocol settings. The unit includes four LED indicators for status monitoring and supports Power over Ethernet (POE) on specific models.
| Input Voltage | 7-24V DC |
|---|---|
| Nominal Current | 300 mA |
| Supported Protocols | DMX512A / RDM / ArtNet / sACN / ESP |
| Dimensions (L x H x W) | 4.21" / 107 mm x 2.24" / 57mm x 2.71" / 69mm |
| Operating Environment | 0° to 50°C |
It is factory configured to be a DMX OUTPUT device listening to the first Art-Net Universe (0x00) and set as a DHCP node.
Engage dip-switch 1 inside the unit to terminate the DMX signal, which is useful if the unit is used at the end of a DMX chain.
The DIR LED is ON when the DMX port is in Output mode and OFF when the DMX port is in input mode.