User guide for EN IR's Classic Frameless NXT Gen, Nexus, and Solis infrared panel heaters, covering installation, operation, settings, and maintenance.
This manual provides step-by-step instructions for installing and operating EN IR’s infrared panel heaters, including NXT Gen, Nexus, and Solis models. It covers mounting options, remote control use, Wi-Fi connectivity, temperature settings, and troubleshooting. The document also includes specifications for different panel sizes and wattages, safety precautions, and maintenance tips.
The manual is designed for homeowners and includes guidance on calculating required wattage based on room size and insulation level, as well as handling accessories like remote controls and wireless temperature sensors specific to each model series.
| Available Sizes | 295mm x 595mm, 595mm x 595mm, 595mm x 995mm, 595mm x 1195mm, 795mm x 1195mm, 995mm x 1195mm |
|---|---|
| Rated Power | 180W, 350W, 580W, 700W, 900W, 1200W |
| Heated Area | 2 - 3m², 5 - 6m², 9 - 10m², 11 - 12m², 15 - 16m², 19 - 20m² |
| Amps | 0.75A, 1.46A, 2.42A, 2.92A, 3.75A, 5A |
Included accessories vary by model: remote control (NXT Gen or Nexus), wireless temperature sensor (Solis), screws, wall plugs, and mounting template.
Yes, but you must use a suspension kit with at least 50mm clearance or install it in a suspended ceiling.
Multiply room volume (m³) by 25 for well-insulated homes, 30 for moderately insulated, or 35 for poorly insulated homes.
Switch it off at the mains, let it cool completely, then turn it back on. If the issue persists, contact the retailer.