User manual for The Silencer noise gate and gated effects loop, covering controls, jacks, power, battery replacement, warranty, and FCC compliance.
The Silencer is a noise gate with a gated effects loop from Electro-Harmonix. It can be used inline or to gate an entire effects loop, with Threshold, Reduction, and Release controls for tuning noise reduction.
The manual describes the input, output, send, and return jacks, 9V power and battery replacement, footswitch and LED operation, warranty service information, and FCC compliance notes.
| Input impedance | 2 MΩ |
|---|---|
| Output jack impedance | 300 Ω |
| SEND jack impedance | 300 Ω |
| RETURN jack impedance | 1 MΩ |
| Reduction range | -70 dB to +4 dB |
| Release time | 8 ms to 4 s |
| Power supply | 9 V DC, 22 mA, center negative |
| Battery | 9 V |
Start with Threshold at minimum, Reduction at maximum, Release at minimum, and the LED lit; turn up the guitar volume while muting the strings, then raise Threshold until the noise disappears and slightly beyond.
Yes. If you are not using the effects loop, do not plug anything into the RETURN jack.
It accepts 9V batteries and can be powered from an Electro-Harmonix 9.6DC-200BI supply or Boss and Ibanez style AC adapters; it draws 22mA at 9VDC with a center negative plug.
Yes, the effects loop remains in the signal path while The Silencer is in buffered bypass mode.