Hardware manual for the EASE ICOOL335X core board, covering its architecture, hardware resources, pin assignments, power, memory, display, network and OS…
The ICOOL335X core board from Guangzhou EASE (广州亿三电子科技有限公司) is a compact 6-layer, gold-plated module measuring 57 x 37 x 2.5 mm with 142 castellated pins at 1.27 mm pitch. It is intended for thin products such as handheld MID devices, in-car GPS units, industrial handhelds, handheld game consoles, industrial control, medical and financial equipment.
The manual describes the board's hardware resources, internal block diagram, Linux and Wince system resources, and the full pin assignment tables with default, second and third functions, plus a dimension drawing. This manual is written in Chinese.
| CPU | ARM Cortex-A8, 600 MHz - 1.0 GHz, 64KB L1 Cache, 256KB L2 Cache |
|---|---|
| GPU | POWERVR SGX530 2D/3D, supports OpenGL ES 1.1, 2.0 / OpenVG 1.0 |
| PMU | TPS650250, 6 power outputs, 0.8 - 3.3 V, lithium battery support |
| DDR RAM | 1 x 16-bit DDR3, 512 MB |
| Flash storage | 4 GB or 8 GB eMMC Flash, or 256 MB NAND Flash |
| LCD | 24-bit RGB, up to 2048 x 2048 pixels, capacitive and resistive touch interfaces |
| Ethernet | 1 x 10/100M LAN8720 on board, expandable to 2 network ports |
| TF card interface | 1 x TF card interface, up to 128 GB |
| Serial ports | 5 x TTL level UART |
| USB | 1 x USB OTG 2.0, 1 x USB HOST 2.0 |
| Audio interface | 1 x I2S audio interface |
| Other interfaces | 1 x PWM output, 6 x AD inputs, 2 x I2C, 1 x SPI, 2 x CAN (1 shared with UART), up to 102 multiplexed GPIO |
| PCB | 6-layer gold-plated circuit board, 57 x 37 mm, 2.5 mm thickness, 142 pins, 1.27 mm pitch |
| Operating system support | Linux 4.1.18 + Qt 4.8.6, Wince 6.0, Wince 7.0 |
| Operating temperature | 0 to 90 °C (industrial version -40 to +125 °C) |
| Operating voltage | 3.7 - 5.5 V, typical 5 V |
| ADC input | 0 - 3.3 V, 1 mA |
| VDDRTC input | 1.7 - 3.3 V, typical 3 V, 1 uA |
| Digital signal levels | Input and output 0 - 3.3 V, 5 mA |
| Linux kernel | Linux 4.1.18 with u-boot-2015.07 |
| Linux filesystems | yaffs2, cramfs, Ext2/3, Fat32, NFS, UBIFS |
The board measures 57 x 37 mm with a thickness of 2.5 mm and has 142 pins at a 1.27 mm pitch.
Supported systems are Linux 4.1.18 with Qt 4.8.6, Wince 6.0 and Wince 7.0.
It has one 16-bit 512 MB DDR3 chip, with 4 GB or 8 GB eMMC Flash or 256 MB NAND Flash for storage.
The working voltage is 3.7 to 5.5 V with a typical value of 5 V.