Instruction and service manual for the E2S AL105NX AlertAlight combined sounder xenon beacon, covering specifications, installation, wiring, tones and…
This document is the instruction and service manual for the E2S AL105NX AlertAlight combined sounder and xenon beacon, issued as D218-00-251-IS Issue 2 (01/09/2021) by E2S Warning Signals of London. It applies to the AL105NXDC012, AL105NXDC024, AL105NXDC048, AL105NXAC024, AL105NXAC048, AL105NXAC115 and AL105NXAC230 variants, which cover 12/24/48 V dc and 24/48/115/230 V ac supplies.
The manual lists electrical and sound output specifications, wiring and tone selection (S1/S2/S3 links), mounting details, EN54-3 approved tones, EN54-23 coverage areas, and approvals including CPR compliance for the DC024 and DC048 models, UL Listing, and DNVGL/Solas acceptance for installation on ships. Safety notices state that installation must be carried out by an electrician in compliance with the latest codes and regulations, and that the unit must be disconnected from the power source before installation or service.
| Operating temperature | -40°C to +66°C (-40°F to 151°F) |
|---|---|
| Ingress / enclosure rating | Type 4 / 4X / 3R / 13, IP66 |
| Weight | 1.8 kg (3.96 lb) |
| Nominal sound output | 105.3 dB(A) Tone 44 @ 1m; max 110.9 dB(A) |
| Supply variants | 12/24/48 V dc and 24/48/115/230 V ac |
| Nominal sounder current (24 V dc) | 33.5 mA |
| Nominal beacon current (24 V dc) | 250 mA |
| Storage temperature | -40°C to +70°C |
| Cable size (AC) | 1.0–2.5 mm² / AWG18–AWG12 |
| Cable size (DC) | 0.2–2.5 mm² / AWG24–AWG12 |
Installation must be carried out by an electrician in compliance with the latest codes and regulations, including NFPA 70 or CSA 22.1 for North American installations.
Yes, the manual instructs users to disconnect the unit from the power source before installation or service to prevent electric shock.
The AL105NXDC024 and AL105NXDC048 are compliant to EN54-3:2001+A1+A2 and EN54-23:2010 for use in fire detection and fire alarm systems.
Units can be mounted using two ø7 mm holes in the mounting lugs or through the back of the housing using the supplied gasket.
No, the manual states that maintenance is none for these units.