User manual for Dynex Hobby's Vortex dynamic balancer and vibration analyzer for hobbyist rotor applications.
This manual provides safety guidelines and operating instructions for the Dynex Hobby Vortex system, a dynamic balancer and vibration analyzer for hobbyist use. It includes safety precautions, component descriptions, and setup instructions for connecting the analyzer to a PC or using optional accessories like an IR sensor and strobe light. The system is designed for radio control model applications and requires proper handling to avoid injury or equipment damage.
The Vortex system consists of a central analyzer unit, an accelerometer, an IR detector, and optional strobe light. It communicates with a PC via a 3.5mm stereo cable connected to the microphone input. The manual details component specifications, connection methods, and operational modes including PC mode and strobe mode, with safety warnings for high-speed rotor operation. This manual is written in Chinese.
| Power Supply | 9~12 VDC |
|---|---|
| Accelerometer Range | +/- 3g |
| Accelerometer Sensitivity | 300 mV/g |
| IR Sensor Optimal Distance | 0.125" (3 mm) |
| Strobe Light Intensity | 25000~35000 MCD |
The IR sensor is used during balancing to synchronize the location of corrective weights. It is not required for the strobe balancing method.
Turn down the “Gain” dial until the signal appears as a normal sine wave. If distortion continues, cease operation of Vortex.