Dynamiko Import air isola hy Air Inlet Installation Manual

Installation manual for the Dynamiko Import air isola hy air inlet, with dimensions, aerodynamic data, acoustic insulation, water tightness, filter and…


Dynamiko Import air isola hy Air Inlet Installation Manual - cover page
Brand
Dynamiko Import
Category
Other products
Document type
Installation Guide
Language
Spanish
Pages
3
File format
PDF
File size
268 KB
Published
17 November, 2026
Updated
17 November, 2026
MD5 checksum
238705A7C6C2C4EA5C5ACDB8CDF3B657

About this manual

This document is the installation manual for the Dynamiko Import air isola hy air inlet. It lists the unit dimensions, installation opening, exterior perforation, material, colors, nominal flow, humidity, section, water tightness, optional filter, and acoustic insulation values for specified combinations.

It also describes installation of the base, cap, optional round adjustment base, external wall cover, and CFA acoustic cover, plus cleaning and maintenance guidance and a warning about covering the inlets during outdoor air quality risks. This manual is written in Spanish.

What's inside

  • Dimensiones
  • Características Aerodinámicas
  • Aislamiento
  • Estanquidad al agua
  • Filtro antisuciedad
  • Relación caudal / humedad relativa
  • Aislamiento acústico
  • Plano instalación
  • Instalación CFA
  • Mantenimiento

Specifications

Aireador dimensions400 x 40 x 30 mm
Installation position>1800 mm from finished floor
Exterior perforation section40 cm² freely distributed
MaterialPolystyrene thermoplastic
Nominal flow at 20 Pa12.5 l/s and 1.6 l/s
Relative humidity60% and 45%
Section40 cm²
Water tightness without flow regulator>150 Pa
Acoustic insulation, ISOLA HY + CE2ADn,e,w(C) 37 dB; Dn,e,w(Ctr) 37 dB
Acoustic insulation, ISOLA HY RA + CE2ADn,e,w(C) 39 dB; Dn,e,w(Ctr) 39 dB
FilterOptional anti-dirt filter

Frequently asked questions

How should the air isola hy be cleaned and maintained?

Use a vacuum cleaner for the interior parts; the outer grille can be cleaned with a damp cloth; the supplied anti-dirt filter can be washed with water and neutral soap; cleaning products should not be used.

What should be done if civil protection authorities warn about a possible outdoor air quality risk?

Completely cover the air inlets with adhesive tape and disconnect mechanical extractors.

Is the CFA acoustic wall cover suitable for exposed outdoor surfaces?

No, it is exclusively for surfaces sheltered from bad weather.

How is the air inlet base secured?

The base is held in place with three screws; the cap is push-fit and can also be screwed for more secure fastening.

Download PDF (268 KB)