DWIN DMG19480T088_01WTR is an 8.8-inch 1920x480 IPS smart display with resistive touch and T5L2-based DGUS II system.
The DMG19480T088_01WTR is a DWIN smart display based on the T5L2 chip and running the DGUS II system. It has an 8.8-inch 1920x480 IPS TFT LCD with resistive touch and conformal coating.
Interfaces include a 30-pin MIPI LCM interface, 4-pin resistive touch interface, 8-pin user interface, 16 MB NOR flash, SD card support, and optional Wi-Fi or USB modules. It is rated for 6-36 V operation with rated power under 5 W, and its operating temperature range is -20 to 70 C. This manual is written in Chinese.
| Chip | T5L2 |
|---|---|
| System | DGUS II |
| Display size | 8.8 inch |
| Resolution | 1920 x 480 |
| Colors | 16.7M |
| LCD type | IPS TFT LCD |
| Viewing angle | 85/85/85/85 degrees (L/R/U/D) |
| Active area | 218.9 mm (W) x 54.7 mm (H) |
| Backlight life | >30000 hours |
| Brightness | 250 nit |
| Brightness control | 0-100 grades |
| Touch type | Resistive touch panel |
| Touch structure | ITO film + ITO glass |
| Touch mode | Point touch and drag |
| Touch life | Over 1,000,000 touches |
| LCM interface | 30-pin patch double row base, MIPI |
| RTP interface | 4Pin_1.0mm |
| User interface download rate | 12 KByte/s typical |
| Flash | 16 MB NOR flash |
| Flash rewrite cycle | Over 100,000 times |
| Expandable flash | Up to 64 MB NOR flash or 48 MB NOR + 512 MB NAND flash |
| Buzzer | 3 V passive buzzer, power <1 W |
| RTC | Super-capacitor, accuracy 1 s/24 h, 30 days after power failure |
| SD card | FAT32, download rate 4 Mb/s |
| Reserved modules | Wi-Fi module (WIFI-10) and USB module |
| PGT05 interface | Update DGUS kernel when product crashes |
| Serial mode | UART2: ON=TTL/CMOS, OFF=RS232; UART4: ON=TTL/CMOS, OFF=RS232 |
| Baud rate | 3150-3225600 bps, typical 115200 bps |
| Data format | UART2: N81; UART4: N81/E81/O81/N82 |
| Interface cable | 8Pin_2.0mm |
| Rated power | <5 W |
| Operating voltage | 6-36 V, typical 12 V |
| Operating current (max backlight) | 170 mA |
| Operating current (backlight off) | 60 mA |
| Recommended power supply | 12 V 1 A DC |
| Operating temperature | -20 to 70 C |
| Operating humidity | 10-90% RH, typical 60% RH |
| EFT power supply | ±2 kV, 100 kHz |
| Form factor | 247.8 x 193.7 x 16.2 mm |
| Installation opening | 232.4(+0.3) x 65.4(+0.3) mm |
It is based on the T5L2 chip and runs the DGUS II system.
The display is 8.8 inches with a resolution of 1920 x 480.
The operating voltage is 6-36 V, with a typical value of 12 V.
The operating temperature range is -20 to 70 C.