User manual for the Dongchuan US-52 AC single-phase asynchronous motor speed controller: technical parameters, dimensions, wiring and operation.
The Dongchuan US-52 is an electronic stepless speed controller for single-phase AC induction motors. The manual states that it is built with electronic control technology and lists small size, high precision, a wide speed range, low energy consumption and long service life among its features. It asks the user to read the instructions before installing and operating the unit and to keep them for later reference.
The five-page manual covers the product overview, main technical parameters, dimensions, wiring diagram, operating method and maintenance precautions. It gives input voltages of AC220V±15%, 50Hz (or AC110V±15%, 60Hz on special order), a speed range of 90 to 1400 r/min and a controller weight of 0.5 kg. The wiring section explains how the jumper K position or the red and white motor leads set the direction of rotation, and the precautions warn that the six terminals at the back of the controller remain live even when the switch is off, so the power plug must be removed. This manual is written in Chinese.
| Model | US-52 |
|---|---|
| Input voltage | AC220V±15%, 50Hz; AC110V±15%, 60Hz (special order) |
| Speed range | 90 r/min to 1400 r/min |
| Operating environment | -10 °C to 50 °C |
| Controlled motor power | 6 W to 400 W (6W, 10W, 15W, 25W, 40W, 60W, 90W, 120W, 140W, 180W, 200W, 250W, 300W, 400W) |
| Capacitor | Built-in |
| Weight | 0.5 kg |
| Appearance | Cable lead-out wires |
It adjusts motor speed from 90 r/min to 1400 r/min.
Change the position of the jumper K: position 2 (CW) is clockwise and position 3 (CCW) is counterclockwise. Always unplug the power plug before changing the wiring.
Turn the speed knob counterclockwise to "0" first, to avoid a momentary high current that can damage the controller.
If the range is too narrow, turn the speed-range adjuster on the left side counterclockwise; if it is too wide, turn it clockwise.
No. It must not be installed where humidity, temperature or vibration is high, or where corrosive gas, liquid or floating dust and metal particles are present.