Dobot M1 Pro SCStudio User Guide

The Dobot M1 Pro SCStudio User Guide explains software setup, programming, and troubleshooting for the industrial robot.

Dobot M1 Pro SCStudio User Guide - cover page
Brand
Dobot
Category
Industrial Robot
Document type
User Manual
Language
English
Pages
119
File format
PDF
File size
6.6 MB
Published
05 October, 2026
Updated
05 October, 2026
MD5 checksum
70DCB6D555C72D6DED8F5E8589FA9F94
PDF
Dobot M1 Pro SCStudio User Guide PDF

About this manual

This guide introduces DobotSCStudio, the programming platform for Dobot M1 Pro robots. It covers the main interface, connection methods, system configuration, and the various programming features such as motion commands, coordinate systems, and I/O monitoring.

Detailed sections describe fast Ethernet connection, alarm handling, remote control, conveyor tracking, palletizing, and provide appendices with servo and controller alarm descriptions. The document also includes troubleshooting tables for common command errors.

What's inside

  • Overview
  • Main Interface Description
  • Fast Connection
  • Programming
  • Alarm Description
  • I/O Monitor
  • Remote Control
  • Conveyor Tracking
  • Palletizing
  • Appendices

Specifications

Default robot IP address192.168.1.6 (cannot be modified)
Minimum PC operating systemWindows 7 64‑bit / Windows 10 32‑ or 64‑bit
Minimum PC memory4 GB or above
Minimum PC CPUIntel i3 or above
Default user passwordadmin

Frequently asked questions

How do I connect DobotSCStudio to the M1 Pro robot?

Connect the robot and PC with an Ethernet cable, set the PC’s IP address to the same network segment as the robot’s default IP 192.168.1.6, then launch DobotSCStudio.

What is the default password for DobotSCStudio?

The default password is "admin"; it can be changed in ToolConfig > BasicConfig > UserMode.

How do I activate the emergency stop on the M1 Pro robot?

Press and hold the emergency stop switch; this powers off the drive supply and stops the robot immediately.

Download PDF (6.6 MB)