Operation and setup manual for the Delta Regis DRFF-530R screw feeder, covering safety, installation, adjustments, programming, troubleshooting…
This manual provides safety, setup, operation, adjustment, programming, troubleshooting, maintenance, service, and warranty information for the Delta Regis DRFF-530R screw feeder. It describes included accessories, product overview, user adjustments for the screw guide plate, infrared sensor, and brush, hopper filling, error codes, and maintenance procedures.
Safety instructions include using the feeder in a suitable dry indoor location, powering it from a properly grounded outlet of the correct voltage with the supplied AC adapter, and not disassembling or repairing it. Repairs must be performed by a Delta Regis authorized service center, and the feeder is warranted for one year from the date of purchase against defects in material and workmanship.
| Hopper capacity | approximately 500 cc (30.51 ci) |
|---|---|
| Minimum space under rail for thread lengths up to 5 mm | 2 mm |
| Minimum space under rail for thread lengths over 5 mm | 4 mm |
| Screw head thickness threshold for Program 13 | 0.5 mm (01 if 0.5 mm or less; 00 if greater) |
| Gate opening gap | 0.2 mm |
| Infrared sensor voltage when open | about 0470 |
| Infrared sensor voltage when screw present | about 5000 |
| Brush motor shutdown delay range | 01-20 (1 second per unit) |
| Brush motor speed range | 01-10 (01 min, 10 max) |
The hopper capacity is approximately 500cc (30.51ci).
Turn off the unit immediately, unplug the power source, and return the unit for service.
No; repairs must be performed by a Delta Regis authorized service center.
The feeder is warranted for one year from the date of purchase against defects in material and workmanship.