Dell PowerVault DL2100 setup guide: unpacking, rack installation, cable connections, power-on, NOM information and technical specifications.
This is the Getting Started With Your System guide for the Dell PowerVault DL2100 system, regulatory model E02S, published by Dell Inc. in August 2009 (P/N T3T1X Rev. A00). It covers the initial installation and configuration steps: unpacking the system, installing the rails and the system in a rack, connecting the optional keyboard, video and mouse, connecting the Ethernet cable, connecting and securing the power cables, turning on the system, and installing the optional bezel.
The guide also points to other information you may need, such as the rack documentation, the Hardware Owner's Manual available at support.dell.com/manuals, and the media shipped with the system, and it explains how to obtain technical assistance. It ends with NOM information for Mexico and technical specifications, including the supported processors, the PCI Express Generation 2 expansion slots on the riser cards, and the supply voltage, frequency and current consumption.
| Processor type | One or two quad-core Intel Xeon processors |
|---|---|
| Bus type | PCI Express Generation 2 |
| Riser 1 (Center Riser) | One full-height, 9.5-inch length, x4 link (slot 1); one low-profile, 9.5-inch length, x4 link (slot 2) |
| Riser 2 (Left Riser) | Two full-height, 9.5-inch length, x8 link (slot 3 and 4) or one full-height, 9.5-inch length, x16 link (slot 3) |
| Regulatory model number | E02S |
| Supply voltage | 100–240 VAC |
| Frequency | 50/60 Hz |
| Current consumption | 7.0–3.5A |
Connect the power cable(s) to the system, bend them into a loop and secure them to the bracket using the provided strap, then plug the other end into a grounded electrical outlet or a separate power source such as a UPS or PDU.
The Hardware Owner's Manual is available online at support.dell.com/manuals; it describes system features, troubleshooting and how to install or replace components.
The system supports one or two quad-core Intel Xeon processors.
The system uses 100–240 VAC at 50/60 Hz, with a current consumption of 7.0–3.5A.