User manual for the Dell PowerEdge 2850 server covering system overview, Dell OpenManage Server Assistant, system setup, technical specifications, and…
The Dell PowerEdge 2850 user manual describes the system overview and the use of Dell OpenManage Server Assistant and the system setup program. It also provides technical specifications and instructions for console redirection.
Console redirection lets you manage a host system from a remote client by redirecting keyboard input and text output through a serial port. The document covers the required hardware and software, host and client configuration, and special key functions. This manual is written in French.
| Processor | Up to two Intel Xeon processors at 2.8 GHz minimum |
|---|---|
| Front Side Bus | 800 MHz |
| Memory Type | PC2-3200 DDR2 SDRAM, 144-bit ECC registered, 400 MHz |
| Memory Sockets | Six 240-pin sockets |
| Maximum RAM | 16 GB |
| Hard Drives | Up to six hot-plug 1-inch Ultra320 SCSI drives |
| Power Supply | 700 W |
| Video Controller | ATI Radeon 7000-M with VGA connectors |
| Height | 8.656 cm (3.40 in) |
| Weight | 26.76 kg (59 lb) in maximum configuration |
| Operating Temperature | 10 to 35 °C |
It supports up to two Intel Xeon processors running at a minimum of 2.8 GHz.
The maximum RAM is 16 GB.
It lets you manage a host system from a remote client by redirecting keyboard input and text output over a serial port, for tasks such as configuring BIOS or RAID settings.
The server uses a 700 W AC power supply.