User manual for the Dell FluidFS NAS Solution (control models E02T and C11M), covering panels, indicators, installation, troubleshooting, diagnostics, and…
This manual is for the Dell FluidFS NAS Solution with control models E02T and C11M. It describes front and rear panel components and indicators, including NIC, SFP+, Fibre Channel, power, cooling fan, cache activity, and status LED codes.
It also covers installation and removal of system components such as the bezel, controllers, power supplies, cooling fans, LED status module, power distribution board, midplane, and expansion cards, plus troubleshooting, embedded diagnostics, technical specifications, and contacting Dell. This manual is written in Chinese.
| Processor type | One or two Intel Xeon E5-5600 or E5-5500 series processors |
|---|---|
| Expansion bus type | PCI Express Generation 2 |
| PCIe slot 1 | Half-length, full-height PCIe Gen2 x4 (x8 connector) |
| PCIe slot 2 | Half-length, full-height PCIe Gen2 x8 (x8 connector) |
| PCIe slot 3 | Half-length, full-height PCIe Gen2 x8 (x8 connector) |
| Memory architecture | 1066 MT/s and 1333 MT/s DDR3 registered or unbuffered DIMM with advanced ECC or memory optimization |
| Memory module slots | Six 240-pin slots |
| Hard drive | One 2.5-inch internal SATA hard drive |
| Rear NIC | One 10/100/1000 Mbps serial and one mini USB, USB 2.0 compatible |
| USB connectors | Two 4-pin USB 2.0 compatible connectors |
| Video connector | 15-pin VGA connector |
| Internal USB | One 4-pin USB 2.0 compatible connector |
| Power supply | 717 W |
It flashes amber when a controller reports a hardware failure, battery failure, or if a controller is missing.
It lights when a storage controller contains cached data and that cached data is being transferred from memory to the hard drive.
Hold the button for ten seconds.
Six 240-pin slots.