De Neef Denepox 40 is a pre-proportioned two-component epoxy injection resin for concrete crack repair and grouting in dry or damp environments.
Denepox 40 is a pre-proportioned two-component epoxy resin that cures into a rigid solid. It is used for low-pressure injection of dry or damp concrete cracks and microcracks, structural bonding, bonding and anchoring, and sealing porous low-density concrete. It is insensitive to humidity, cures in damp environments, has low viscosity for deep crack penetration, excellent adhesion exceeding the cohesive strength of concrete, is solvent-free, has a long working time, and resists acids, alkalis, oils, greases and petroleum derivatives after curing. It is not suitable for applications in contact with flowing water.
Construction requires a clean substrate, approved injection ports, drilling according to local regulations, and fixing ports with Multitek Adhesive SDW. Components A and B are mixed with a low-speed mixer at a ratio of A/B = 100/30 by mass or 91/32 by volume, then injected with a manual or mechanical pump. Initial cure is about 24 hours at 20°C. The document also lists physical properties, packaging, CE certification, storage requirements, accessories, and health and safety precautions. This manual is written in Chinese.
| Bond strength to dry concrete | Exceeds cohesive strength of concrete |
|---|---|
| Bond strength to damp concrete | Exceeds cohesive strength of concrete |
| Compressive strength | Approx. 100 N/mm |
| Density | 1.1 kg/dm3 |
| Viscosity after mixing at 25°C | Approx. 85 mPas |
| Mixing ratio by mass | A/B = 100/30 |
| Mixing ratio by volume | A/B = 91/32 |
| Initial cure time at 20°C | Approx. 24 hours |
| Shelf life | 2 years |
| Storage temperature | 5°C to 50°C |
No. Denepox 40 is not suitable for applications in contact with flowing water.
A/B = 100/30 by mass or 91/32 by volume.