Safety advice, warnings, parts list and setup steps for the Dancover 5m Series PVC/PE storage tent, including snow, rain and securing precautions.
This manual covers the Dancover 5m Series storage tent in PVC/PE, dated 22-01-2020. It opens with safety advice about local approval for tents larger than 75 m2, securing the tent with straps and pegs, keeping open fire away, evacuating under extreme weather, removing snow from the roof and preventing rain puddles from building up on it. It also explains that the tent must be totally dry before repacking to avoid mildew, and that unpacking and repacking in freezing temperatures should be done indoors.
Warnings follow about removing the protective oil from the pipes before setup, handling the tent carefully, not forcing the frame and choosing a site clear of sprinkler, water, gas and electrical lines. The rest of the document is a numbered parts list with quantities for the 5x4m, 5x6m, 5x8m, 5x10m and 5x12m sizes, illustrated assembly steps for the frame, roof cover, steel clips, wall and door panels, and Dancover contact details.
| Cover material | PVC/PE |
|---|---|
| Available sizes | 5x4m, 5x6m, 5x8m, 5x10m, 5x12m |
| Middle leg | 1880 mm, Ø50 |
| Frame pole | 1880 mm, Ø38 |
| Peg | 345 mm |
| Approval threshold | tents larger than 75 m2 |
In some countries approval is needed to set up a tent larger than 75 m2, and it is your responsibility to comply with local rules and regulations.
Secure it with straps and pegs as soon as it is assembled.
Remove snow from the roof of the tent regularly, because heavy snow can cause the tent to collapse.
The pipes are covered with oil to prevent rust, so remove the oil carefully before setting up the tent to keep the cover clean.