Coollaboratory Liquid Ultra Liquid Thermal Pad Installation Guide

Short installation guide for Coollaboratory Liquid Ultra liquid thermal pad, covering preparation, application, mounting, and removal.


Coollaboratory Liquid Ultra Liquid Thermal Pad Installation Guide - cover page
Brand
Coollaboratory
Category
Other Electronics
Document type
Installation Guide
Language
English
Pages
2
File format
PDF
File size
282 KB
Published
17 November, 2026
Updated
17 November, 2026
MD5 checksum
524D9A3286D96BF5723A4C027700F1B0

About this manual

Coollaboratory Liquid Ultra is a heat-conducting paste supplied with a syringe, brush, and cleaning tissue. The short manual explains preparation, application, mounting, and removal for a standard CPU cooler.

Before use, both CPU and cooler surfaces must be thoroughly cleaned and any thermal pad removed; the product must not contact aluminum. Apply a small amount, spread it smoothly, press the cooler without sliding, and wipe it off for removal.

What's inside

  • Preparation
  • Warning
  • Advice
  • How to apply
  • Removing the Liquid Ultra

Specifications

Application amountapprox. three or four scale lines of the syringe
Contact area restrictionnot aluminum

Frequently asked questions

Can Coollaboratory Liquid Ultra be used on aluminum?

No. It corrodes aluminum, so it must not be used on an aluminum contact area.

How much Liquid Ultra should be applied?

About three or four scale lines of the syringe are enough.

How should the surfaces be prepared?

Both the CPU and cooler must be thoroughly cleaned and free of dust and grease; remove any thermal pad first.

How is Liquid Ultra removed?

Wipe it off with a kitchen towel or the supplied cleaning tissue; solvents such as acetone or gasoline are not helpful.

Download PDF (282 KB)