Installation, use and maintenance instructions for the Challenger CR 428/498/568 No Frost refrigerator, covering warnings, parts and installation.
This manual covers the Challenger CR 428/498/568 No Frost refrigerator for installation, use and maintenance. It lists general features such as a Twist Ice ice maker with an ice storage compartment, multiflow cold air, a deodorizer, LED interior lighting, anti-spill glass trays, fruit and vegetable storage, and an internal water dispenser with a 2.5 L tank. The CR 568 has electronic touch temperature control, the Superfreezer compartment applies to the CR 498 and CR 568, and the Multifresh compartment does not apply to the CR 428.
Installation requires a firm, level floor, leveling with the adjustable front feet, and at least 10 cm of space behind the refrigerator. The manual specifies a grounded three-terminal plug, a circuit protected by a breaker of at least 15 A, and admissible voltages of 115 V/60 Hz, 220 V/50 Hz and 220 V/60 Hz. After transport, the refrigerator should rest for two hours before connection and run for 2 to 3 hours before food is placed inside. This manual is written in Spanish.
| Climate class | ST, ambient temperature up to 38°C |
|---|---|
| Internal water dispenser tank capacity | 2.5 L |
| Minimum clearance behind refrigerator | 10 cm |
| Circuit breaker protection | Minimum 15 A |
| Admissible voltage and frequency | 115 V/60 Hz, 220 V/50 Hz, 220 V/60 Hz |
| Recommended stabilizer when voltage varies | 1000 W |
It should rest for two hours before connecting. The manual also states the tilt angle when moving it must not exceed 45 degrees.
It should run for 2 to 3 hours before products are placed in the interior.
Connect it only to a grounded wall outlet. The manual says not to use an extension cable or adapter and to protect the circuit with a breaker of at least 15 A.
The internal water dispenser tank has a capacity of 2.5 L.