Processing instructions for CFP Composites BM-5 carbon fibre sheet covering cutting, adhesive bonding, mechanical fixing and painting.
CFP Composites BM-5 is a black carbon fibre sheet material supplied in 1.3 m x 0.8 m sheets at 5 mm thickness. The document gives processing data for cutting, bonding and painting the material, with starting settings and care notes.
The five-page technical instruction covers machining and cutting with CNC, table saw, circular saw, jig saw and mitre saw; bonding by adhesive and by mechanical fixing; and painting. It also lists typical material values and health and safety precautions.
| Colour | Black |
|---|---|
| Hardness, Shore D | 84 |
| Density | 1.29 g/cm³ |
| Flexural Strength | 273 MPa |
| Flexural Modulus | 16.6 GPa |
| Tensile Strength | 178 MPa |
| Compressive Strength | 124 MPa |
| Compressive Modulus | 13.5 GPa |
| Coefficient of Thermal Expansion | 2.85 E-06 m/m/°C |
| Maximum air temperature stipulated | 180°C / 356°F |
| Sheet size | 1.3 m x 0.8 m |
| Thickness | 5 mm |
BM-5 contains carbon fibres in a special chopped configuration, infused with a Polyamide 6.6 binder to form a solid sheet.
BM-5 can be cut using standard metallic cutting tools. Cutting must be dry, with no cutting fluids, and diamond cutters should not be used.
CFP Composites recommends Isopropyl alcohol (IPA) and lint free cloths.
At minimum, use P3 rated breathing apparatus, safety or disposable overalls, suitable gloves and safety glasses.