Cermate TN-604S-C Panel Master HMI Mitsubishi R16EN PLC Ethernet Connection Guide

This guide explains how to connect and configure the Cermate TN-604S-C Panel Master HMI with a Mitsubishi R16EN PLC via Ethernet using GX Works3.


Cermate TN-604S-C Panel Master HMI Mitsubishi R16EN PLC Ethernet Connection Guide - cover page
Brand
Cermate
Category
Industrial Robot
Document type
User Manual
Language
Chinese
Pages
11
File format
PDF
File size
1.4 MB
Published
20 October, 2026
Updated
20 October, 2026
MD5 checksum
D0CF051AA6765B45BDB5788C4FC27BB1

About this manual

This technical document provides instructions for establishing an Ethernet connection between the Cermate TN-604S-C Panel Master HMI and a Mitsubishi R16EN PLC. It details the configuration steps within the GX Works3 software to link the PC to the PLC and set the necessary communication parameters. This manual is written in Chinese.

What's inside

  • PLC Software Connection
  • Parameter Setting
  • Ethernet Port Configuration
  • HMI Parameter Setting
  • Address Range
  • Communication Protocol

Frequently asked questions

Which Mitsubishi PLC models does this guide cover?

This guide covers the R04, R08, R16, R32, and R120EN PLC models.

What port number is recommended for the Ethernet connection?

The guide recommends changing the port to 1025 because the range 5000~5009 is unavailable.

Download PDF (1.4 MB)