The Broadwit WitNetIES3009 service manual provides safety guidelines, specifications, installation steps, and maintenance procedures for the industrial…
This manual describes the WitNetIES3009 industrial Ethernet switch, a rugged, fan‑less, network‑managed device designed for harsh industrial environments. It outlines the product’s hardware architecture, port options, power specifications, and environmental ratings.
The document includes safety precautions, detailed installation instructions (including DIN‑rail mounting and cable/ fiber connections), and step‑by‑step maintenance procedures such as opening and closing the chassis, with warnings for qualified personnel only. This manual is written in Chinese.
| RJ45 ports | Maximum 8 ports, 10/100Base‑TX |
|---|---|
| Fiber ports | Maximum 4 ports, 100Base‑FX (single‑mode or multimode) |
| System switching bandwidth | 1.8 Gbps |
| Maximum forwarding rate | 1.34 Mpps |
| Input voltage | 24 VDC, 48 VDC, 110 VDC, 220 VAC/DC |
| Power consumption (full load) | < 9 W |
| Operating temperature | -40 °C ~ +85 °C |
| Dimensions (W×H×D) | 69 mm × 140 mm × 125 mm |
| Weight | 0.6 kg |
| Ingress protection | IP40 |
| MTBF | 35 years |
| Warranty | 5 years |
The switch can be configured with up to eight 10/100Base‑TX RJ45 ports.
The system switching bandwidth is rated at 1.8 Gbps.
Insert the DIN rail into the spring‑loaded slot on the DIN‑track connector, then rotate the unit slightly upward to lock it in place.