Bosch RT10-RF / RT10-RFV smart radiator thermostat installation and user manual covering mounting, calibration, reset and technical data.
This manual covers the Bosch RT10-RF / RT10-RFV smart radiator thermostat, which regulates the desired room temperature in half-degree steps through the app and supports per-room temperature programs, frost protection below 4 °C, and regular valve opening to prevent scaling.
It explains safety symbols and warnings, EU and radio conformity declarations, product overview, technical data, installation, software setup, mounting, calibration, display symbols, reset procedure, and environmental protection and recycling. This manual is written in French.
| Model | RT10-RF & RT10-RFV |
|---|---|
| Thermostat type | Thermostat AA |
| Batteries | 2 x LR6/AA |
| Power consumption | ≤ 120 mA |
| Reception category | Category SRD 2 |
| Emission frequency | 868.3 MHz, 869.525 MHz |
| Emission power | ≤10 mW |
| Radio range (free space) | ≤100 m |
| Duty cycle at 868.3 MHz | <1% per hour |
| Duty cycle at 869.525 MHz | <10% per hour |
| Valve connection | M30 x 1.5 mm |
| Protection rating | IP20 |
| Operating mode | Type 1 |
| Pollution degree | 2 |
| Ambient temperature | 0 °C to 50 °C |
| Air humidity | 5% to 80% |
| Dimensions | 48 mm x 57 mm x 103 mm |
| Weight (without batteries) | 140 g |
For correct operation, it must be used with Bosch EasyControl/Buderus Logamatic TC100.
Open the battery compartment, remove one battery, press and hold the mode button, reinsert the battery, and continue holding until rES appears and the orange LED flashes; release briefly, then hold again until the screen turns off and the LED stops flashing.
It regulates the desired room temperature in half-degree steps.
It uses 2 x LR6/AA batteries.