Bosch PRA-EOL line end device monitors speaker line integrity in PRAESENSA voice alarm systems using pilot tone detection and amplifier feedback.
The PRA-EOL is a small line end device from Bosch for monitoring the end of a speaker line in emergency voice alarm systems. It connects after the last speaker in a cascade and communicates with the PRAESENSA amplifier channel that drives the line.
Monitoring uses a 25.5 kHz pilot tone at 1.5–3 VRMS and reports line shorts or interruptions through the amplifier without extra wiring. The device is certified to EN 54-16 and ISO 7240-16, carries CE marking, complies with RoHS, and can be mounted in Bosch speaker monitoring boards or standard cable junction boxes. This manual is written in Chinese.
| Pilot tone frequency | 25.5 kHz |
|---|---|
| Pilot tone level | 1.5 - 3 VRMS |
| Amplifier load | < 100 mW |
| Maximum speaker cable length | 1000 m |
| Maximum speaker cable capacitance | 80 nF |
| Maximum input voltage | 150 VRMS |
| Fault detection | Line short, line interruption |
| Board shape dimensions (H x W x D) | 78 x 60 x 16 mm |
| Box shape dimensions (H x W x D) | 45 x 60 x 18 mm |
| Protection rating | IP30 |
| Weight | 25 g (0.055 lb) |
| Operating humidity | 5% to 95% non-condensing |
It monitors the integrity of a speaker line at its end in emergency voice alarm systems.
It uses amplifier-based pilot tone detection and sends feedback over the speaker line, so fault conditions or status can be reported without extra wiring.
It can only be used with Bosch PRAESENSA systems.
It is certified to EN 54-16 and ISO 7240-16.