Bosch Plena power amplifier manual covering installation, connections, supervision, operation, maintenance, and technical data for four models.
This manual provides the information needed to install, configure, operate, and maintain the Bosch Plena power amplifiers LBB1930/20, LBB1935/20, LBB1938/20, and LBB1938/70. It covers safety, system overview, rack installation, front and rear panel connections, external wiring, supervision functions, operation, and maintenance.
The amplifiers are mono units with 70 V and 100 V constant voltage outputs and a low impedance output for 4 or 8 Ohm loudspeakers. They provide Priority and Program inputs, a 100 V slave input, balanced line inputs with loop-through, overload and short-circuit protection, temperature-controlled fan cooling, and optional battery operation with automatic switchover from the mains supply.
| Mains voltage (LBB 1930/20, LBB 1935/20) | 230 / 115 VAC, ± 10%, 50–60 Hz |
|---|---|
| Mains voltage (LBB 1938/20) | 230 VAC, 50–60 Hz |
| Mains voltage (LBB 1938/70) | 110 VAC, 50–60 Hz |
| Battery voltage | 24V DC, 20–26.5 V |
| Rated power (LBB 1930/20) | 400 VA |
| Rated power (LBB 1935/20) | 960 VA |
| Rated power (LBB 1938/x0) | 1600 VA |
| Frequency response | 50 Hz – 20 kHz (+1/-3 dB @ -10 dB ref. rated output) |
| Distortion | <1% @ rated output, 1 kHz |
| Signal-to-noise ratio (LBB 1930/20) | > 80 dB |
| Signal-to-noise ratio (LBB 1935/20) | > 85 dB |
| Signal-to-noise ratio (LBB 1938/x0) | > 90 dB |
| Output power (LBB 1930/20) | 120 W |
| Output power (LBB 1935/20) | 240 W |
| Output power (LBB 1938/x0) | 480 W |
| Low impedance output | 4 or 8 Ohm loudspeakers |
| Rack mounting | 19-inch rack |
| Standards compliance | EN54-16 and EN60849 compliant systems |
The manual covers the Bosch Plena power amplifiers LBB1930/20, LBB1935/20, LBB1938/20, and LBB1938/70.
They have 70 V and 100 V constant voltage outputs and a low impedance output for 4 or 8 Ohm loudspeakers.
Two inputs, "Priority" and "Program," give priority and controlled outputs, and a 100 V slave input allows connection to existing loudspeaker lines.
Yes. Battery operation with automatic switchover from the mains supply is available.
It is intended for tabletop use and can also be mounted in a 19-inch rack using the supplied Bosch mounting brackets.