User manual for Bosch HP1630/HP1631 impact drills covering safety, operation, assembly, maintenance, specifications and accessories.
This manual covers the Bosch HP1630 and HP1631 impact drills. It describes intended use for impact drilling in brick, concrete and stone and non-impact drilling in wood, metal, ceramic and plastic, along with general and tool-specific safety warnings, operating instructions, assembly, maintenance and optional accessories.
The drills are double insulated and use single-phase AC power matching the rating plate. The manual describes a variable-speed trigger, reverse switch, operating-mode selector, side handle, chuck installation for keyed and keyless versions, and an optional depth gauge. This manual is written in Chinese.
| Drilling capacity in concrete | 16 mm (HP1630 and HP1631) |
|---|---|
| Drilling capacity in steel | 13 mm (HP1630 and HP1631) |
| Drilling capacity in wood | 30 mm (HP1630 and HP1631) |
| No-load speed | 0-3,200 r/min |
| Impacts per minute | 0-48,000 |
| Length | 296 mm (HP1630), 295 mm (HP1631) |
| Net weight | 2.1 kg (HP1630), 2.0 kg (HP1631) |
| Safety class | /II |
| Product standards | GB3883.1-2008, GB3883.6-2012, GB4343.1-2009, GB17625.1-2012 |
It is used for impact drilling in brick, concrete and stone, and for non-impact drilling in wood, metal, ceramic and plastic.
The connected power voltage must match the rating plate, and only single-phase AC power may be used.
Move the reverse switch to the A side for clockwise rotation or the B side for counterclockwise rotation, and change direction only after the motor stops.
Move the mode change lever to the right for rotation with impact, or to the left for rotation only.