Instruction manual for the Blade Fusion 360 helicopter, covering safety warnings, transmitter setup, flight battery installation, control tests and maintenance.
This instruction manual covers the Blade Fusion 360 BNF Basic helicopter. It lists the airframe and included components, including a brushless out-runner motor, flight controller/receiver, 60A ESC and servos, and identifies a Spektrum 6S LiPo battery, charger and DSM2/DSMX transmitter as required.
The document includes safety precautions and setup or maintenance subjects such as transmitter setup, transmitter and receiver binding, throttle hold, control tests, low voltage cutoff, governor operation, gyro gain adjustment, tail belt tension, troubleshooting, exploded view and parts list.
| Length | 26.9 in (685mm) |
|---|---|
| Flying Weight | 32.2 oz (915 g) |
| Main Rotor Diameter | 31.3 in (796mm) |
| Tail Rotor Diameter | 6.9 in (175mm) |
| Motor | Brushless Out-Runner Motor, 1800Kv (BLH4731) |
| ESC | Brushless 60A ESC (BLHHW60A) |
| Battery | Spektrum 6S, 22.2 V LiPo, 1800mAh, 50C, IC3 |
| Receiver | Flight Controller/Receiver (SPMFC6250HX, SPM4649T) |
The manual lists a Spektrum 6S, 22.2 V LiPo battery, 1800mAh, 50C, IC3 as required.
Land immediately when the ESC activates LVC; continuing to fly after LVC can damage the battery, cause a crash or both.
A full-range DSM2/DSMX technology transmitter is required.
The flying weight is 32.2 oz (915 g).