Installation and operation manual for BendPak HDS-14 and HDS-14X 14,000-pound commercial four-post lifts, covering safety, setup and maintenance.
This is the Installation and Operation Manual (Manual Revision E4, May 2019, part number 5900161) for the BendPak HDS-14 and HDS-14X, 14,000 pound capacity commercial grade four-post auto/truck lifts. It begins with safety instructions, hazard level definitions, owner's responsibility and receiving inspection, then walks through site selection, floor and concrete requirements, column and cross tube installation, cable and sheave installation, power unit hookup, hydraulic hose and air line routing, anchoring and lift start-up adjustments.
The manual continues with leveling, bleeding, optional equipment installation, operation instructions and lift operation safety, followed by maintenance, a troubleshooting guide, maintenance records, an installation form, part number lists and a certificate of compliance. European users are told that 400V 50Hz supply details are included with the electrical control box and that the supply wiring details in the manual should be disregarded.
| Lifting Capacity | 14,000 pounds |
|---|---|
| Maximum Operating Hydraulic Pressure | 2,250 PSI |
| Electrical Supply (European users) | 400 V, 50 Hz |
| Installation Location | Indoor locations only |
They are 14,000 pound capacity commercial grade four-post auto/truck lifts.
The maximum operating hydraulic pressure is 2,250 PSI.
BendPak lifts are designed to be installed in indoor locations only.
Do not accept the goods until the shipping carrier makes a notation on the freight bill for the missing or damaged goods.